We supplied this customer with their metal roof roll formed on the lake. The cabin was built on an island so access was tough to say the least.
Often a job may be complimented with multiple systems. There is nothing saying you can't incorporate different metal roof systems with others. This customer chose to mix Decra steel shake with a Copper Penny snap lock roof.
Sometimes you may want to put a system together that compliments an area of your home. Here we installed Longboard, aluminum siding made to look like wood. It was at the poolside where it could be shown off to guests.
We rolled these panels just over 60 feet long for a seed plant in Manitoba. We have site rolled panels up to 120 feet long.
Standing seam roof.
Distinction siding, standing seam siding, rollform fascia.
Flush face wall cladding.
ACM soffit, steel soffit, ACM siding, steel fascia.
Flush face siding and soffit, standing seam roof, steel fascia.
Curved standing seam roofing.
Decra Shake xd.
Snaplock roofing, corrugated metal siding.
Flush face wall cladding and standing seam roof.
Aluminum Composite Metal panels (ACM)
Ceraclad fiber cement panels.
Tough Rib roof panels.
This wall was built out using galvanized Z bars and semi rigid insulation. The flush face cladding gets installed over top.
This roof incorporated a snowstop system that clamps on to the seams. This limits penetrations from fasteners.
The panels for this canopy had to be run through a curving machine to achieve the proper radius.
After the panels get roll formed we crane them to the roof for install.
Often we will work with other trades to finish off curbs and other penetrations.
Some of the material we work with comes with a protective film that doesn't get removed until the job is done.
Standing seam cladding, Distinction cladding, Standing seam roof.
ACM Panels
Longboard, Snaplock ceiling, Copper Penny flashing.
Standing Seam Cladding.
Flush Face Cladding
Decra Shake XD, Copper weather vane
Decra Shake XD with Copper Weather Vane